Vesda VEA-A10 with 3.5" Display
Part number: VEA-040-A10
The VESDA-E VEA series of detectors combine VESDA reliability and
early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors. They use patented air sampling points and multi-channel microbore air-sampling with three alarm sensitivity settings for the sampling points. As a multi-channel addressable system, the VEA detector is able to divide a protected space into sampling locations, enabling the localization of potential sources of re for faster incident response. The detectors are suitable for protection of areas where pinpoint location of re events is essential, thus providing ideal re detection solutions for healthcare, of ces, education, retail, prisons and electrical cabinets. A wide range of features provide exibility, eld programmability, enhanced connectivity and reduced total cost of ownership

View Related Products

Please call or Enquire Here for pricing

qty

Vesda-E VEA 40-Local Relay StaX
Part number: VEA-040-STX
The VESDA-E VEA Local Relay StaX allows signaling of alarm location fromthe detector via relays and provides mounting of fire panel loop input modulesinside the enclosure. It is directly powered and controlled from the detector. Depending on the configuration a VEA detector can power and control up to two (2) Expansion StaX and up to three (3) Relay StaX. Each Relay StaX provides 40 relay connections corresponding to 40 tubes on a VEA detector or Expansion StaX providing full addressability.


View Related Products

Please call or Enquire Here for pricing

qty

Tube Reel 4mm
Part number: VSP-991
VESDA-E VEA Microbore Tube Reel 4mm
Please call or Enquire Here for pricing

qty

RA Joiner 6mm
Part number: VSP-1003
VESDA-E-VEA RA Joiner 6mm (Pack of 10)
Please call or Enquire Here for pricing

qty

Straight Union 6mm
Part number: VSP-1001
VESDA-E VEA Straight Union 6mm (Pack of 10)
Please call or Enquire Here for pricing

qty

Reducer
Part number: VSP-1000
Reducer 4mm-6mm (Pack of 10)
Please call or Enquire Here for pricing

qty

Surface Mount Sampling Point 6mm (Pack of 22)
Part number: VSP-982-B22
Surface mount sampling points are designed for use where access to the ceiling void is limited.
Microbore tubes are run along the ceiling, visible in the protected area. These sampling points are screwed directly to the ceiling. Surface mount sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes.

Please call or Enquire Here for pricing

qty

Surface Mount Sampling Point 4mm (Pack of 22)
Part number: VSP-983-B22
Surface mount sampling points are designed for use where access to the ceiling void is limited.
Microbore tubes are run along the ceiling, visible in the protected area. These sampling points are screwed directly to the ceiling. Surface mount sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes.
Please call or Enquire Here for pricing

qty

Surface Mount Sampling Point 6mm (Pack of 22)
Part number: VSP-982-W22
Surface mount sampling points are designed for use where access to the ceiling void is limited.
Microbore tubes are run along the ceiling, visible in the protected area. These sampling points are screwed directly to the ceiling. Surface mount sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes.
Please call or Enquire Here for pricing

qty

Surface Mount Sampling Point 4mm (Pack of 22)
Part number: VSP-983-W22
Surface mount sampling points are designed for use where access to the ceiling void is limited.
Microbore tubes are run along the ceiling, visible in the protected area. These sampling points are screwed directly to the ceiling. Surface mount sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes.
Please call or Enquire Here for pricing

qty

Standard Sampling Point 6mm (Pack of 22)
Part number: VSP-980-B22
Standard sampling points are designed for a ceiling with a void where microbore tubes are run in the void and sampling points are mounted in the ceiling. Sampling points can either be directly screwed to the ceiling or mounted using a retainer supplied as a standard inclusion.

Standard sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes. The inlet has a swivel joint to allow exible orientation of the tube. The standard sampling points allow blind mounting removing any need to access the ceiling void once the microbore tubes are installed and passed through the ceiling.

Please call or Enquire Here for pricing

qty

Standard Sampling Point 4mm (Pack of 22)
Part number: VSP-981-B22
Standard sampling points are designed for a ceiling with a void where microbore tubes are run in the void and sampling points are mounted in the ceiling. Sampling points can either be directly screwed to the ceiling or mounted using a retainer supplied as a standard inclusion.

Standard sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes. The inlet has a swivel joint to allow exible orientation of the tube. The standard sampling points allow blind mounting removing any need to access the ceiling void once the microbore tubes are installed and passed through the ceiling.
Please call or Enquire Here for pricing

qty

Standard Sampling Point 6mm (Pack of 22)
Part number: VSP-980-W22
Standard sampling points are designed for a ceiling with a void where microbore tubes are run in the void and sampling points are mounted in the ceiling. Sampling points can either be directly screwed to the ceiling or mounted using a retainer supplied as a standard inclusion.

Standard sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes. The inlet has a swivel joint to allow exible orientation of the tube. The standard sampling points allow blind mounting removing any need to access the ceiling void once the microbore tubes are installed and passed through the ceiling.
Please call or Enquire Here for pricing

qty

Standard Sampling Point 4mm (Pack of 22)
Part number: VSP-981-W22
Standard sampling points are designed for a ceiling with a void where microbore tubes are run in the void and sampling points are mounted in the ceiling. Sampling points can either be directly screwed to the ceiling or mounted using a retainer supplied as a standard inclusion.

Standard sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes. The inlet has a swivel joint to allow exible orientation of the tube. The standard sampling points allow blind mounting removing any need to access the ceiling void once the microbore tubes are installed and passed through the ceiling.

Please call or Enquire Here for pricing

qty