ABS Pipe 3M Length 25mm
Part number: WABS008-25
3 Meter ABS 25mm aspirating smoke detection pipe EN54-20 approved.
Please call or Enquire Here for pricing

qty

ABS Adaptor 25/27mm
Part number: WABS005-1
Connects two pieces of aspirating smoke detection pipe of different sizes 25mm to 27mm (VisaVersa).
Please call or Enquire Here for pricing

qty

ABS 90 Degree Bend 25mm
Part number: WABS001-25
Designed for changing the direction of a pipe run at 90 degree’s on an aspirating smoke detection pipe network.
Please call or Enquire Here for pricing

qty

ABS Tee 25mm
Part number: WABS006-25
This device is used when a “Bull nose” or “Side tee” flow split is required.
Please call or Enquire Here for pricing

qty

ABS End Caps 25mm
Part number: WABS007-25
Used to terminate air flow on the air sampling network.
Please call or Enquire Here for pricing

qty

ABS Flush Sampling Kit
Part number: WABS019F/25
Used when the aspirating pipe work is above a suspended ceiling, the flush head is fixed to the ceiling tile with the supplied nut and linked to the pipework using a two meter length of 10mm OD tubing and a capillary Tpiece which links into the pipe.

Please call or Enquire Here for pricing

qty

ABS Conical End Cap Kit
Part number: WABS019C/25EC
The capillary end cap is fixed to one end of the pipe run, followed by 2 meters of capillary 10mm OD nylon tube which links to the conical sampling head which is specifically designed to operate in a chilled or cold store.

Please call or Enquire Here for pricing

qty

ABS Discrete End Cap Kit
Part number: WABS020/25EC
The capillary end cap fits on to the end of the pipe run. There is then a 2 meter 10mm OD nylon tube which links into the discrete head. The discrete cap is supplied with a solid head.
Please call or Enquire Here for pricing

qty

ABS Conical Head Only
Part number: WE700-SP
Is fixed to a ceiling tile, chill or frozen store ceiling with the nut or washer (supplied) to sample air. The conical shape is specifically designed to avoid ice or condensation from freezing over or covering the sampling hole.
Please call or Enquire Here for pricing

qty

ABS End Cap Adaptor 25/10mm
Part number: WECA 25/10
The capillary end cap is used when it is necessary to sample air not only in the pipe run, but also at the end of the pipe run.
Please call or Enquire Here for pricing

qty

ABS Sharp 90 Degree Bend
Part number: WPIP-017
Designed for changing the direction of a pipe run at 90 degree’s on an aspirating smoke detection pipe network.
Please call or Enquire Here for pricing

qty

Vesda Detection Pipe Label
Part number: ABS128-015
VESDA® Detection Pipe Label - pack of 100pcs
Please call or Enquire Here for pricing

qty

Air Sampling Point Label
Part number: ABS128-014
Air Sampling Point Label 128-014 - Pack of 100pcs.
Please call or Enquire Here for pricing

qty

Flexi Bend 1m
Part number: WPIP-021
Soft PVC hose with embedded steel wire reinforcement. Very flexible, strong, abrasion resistant, smooth inside and outside.
Please call or Enquire Here for pricing

qty

Refrigerated Storage Sampling Kit
Part number: VSP-860
Refrigerated Storage Sampling Kit provides a standardised method of smoke sampling for Refrigerated Storage facilities in a considerably improved manner allowing simplified installation with reduced maintenance, thus promoting more reliable and hassle-free operation.
Refrigerated Storage Sampling Kit has been designed to replace standard cone-shaped sampling nozzles installed at the ceiling in existing or new Refrigerated Storage facilities.
This kit can be installed in the entire facility or combined with standard sampling points if required. The aim here is to reduce direct ice blockage of the sampling points hence this kit is recommended for installation in areas where higher humidity is likely to occur as a result of vehicle and pedestrian traffic (e.g. areas close to doorways or perimeter of the facility).
Please call or Enquire Here for pricing

qty

Double Run Conduit
Part number: CC75-75


View Related Products

Please call or Enquire Here for pricing

qty